Lockly Secure LUX User Manual

SECTION 3.1024
3.10 Adding an RFID Card
While in Programming Mode, select “1AD” to add an RFID card. If you are not
in
Programming Mode, please see Section 3.2 to enter Programming Mode.
After pressing “1AD” press “Id” to add an RFID card.
PASS will show on the keypad once
card is registered successfully.
Put the RFID card to the RFID card
sensor position on exterior panel.

Lockly Secure LUX Specifications

General

Brand	Lockly
Model	Secure LUX
Category	Door locks
Language	English