SECTION 4.2 27
4.1 Locking/Unlocking Lockly™ with Access Codes
Lockly™ Secure can be unlocked using 1 of 5 ways - via your stored Access
Code, registered fingerprint, RFID Card, smartphone with Bluetooth, or with
the physical key supplied with your lock.
OK Button
Three consecutive wrong attempts will put Lockly™ in
“Safe Mode”. (See Section 4.6)
Slide your hand across the screen
to activate the keypad.
Enter your 6 to 8 digit Access Code
followed by the OK button. Press
OK anytime to reset if you entered
the wrong digit.
If the Access Code entered is
correct, the door will unlock. If the
Access Code entered is incorrect,
Lockly™ will beep twice.
Lock your Lockly™ Secure by pressing the OK Button anytime when the door is
closed. Lockly™ Secure will also auto-lock after five (5) seconds after unlock-
ing and opening.
Hold OK Button (3 sec)
You may toggle between two types
of keypad displays to enter your
Access Code. The fixed digit version
and the PIN Genie
TM
version (Recom-
mended). Press and hold the OK
Button for 3 seconds to toggle back
and forth between the two keypads.
PIN Genie
TM
Fixed Digit
To Next Page
Loading...
Need help?
General
