SECTION 6.1 37
Auto Lock Feature
Lockly™ Secure
can be programmed to auto-lock between 5-300 seconds
after the door opening. You can always manually lock by pressing the
button anytime located on the bottom of the keypad.
9V Backup Access
When your Lockly™
is out of power, you can temporarily activate the
keypad by using a 9V battery against the bottom of the exterior side of the
smart lock. Please see
Section 2.9 for more info.
Physical Keys
Even though you have your fingerprints registered, RFID cards and Access
Codes stored, it’s always best practice to carry your physical keys with you
at all times in case for any reason, Lockly™ falls into Safe Mode.
Initial Code
You may find an Initial Code Card with an Initial Code included in your
package. It is very crucial that you do not lose this card. Please store this
card safely as you will need the default
Initial Code on that card to master
reset
your lock in case, for any reason, you have lost the phone paired to
Lockly™ and also forgot your
Access Code.
Troubleshooting
Please visit http://lockly.com/help for troubleshooting and the most
frequently asked questions and answers.
6.1 Important Notes
To Next Page
Loading...
Need help?
General
