SECTION 3.6 17
3.6 Adding a Fingerprint
We are using an advanced biometric sensor, providing the most secure
fingerprint authentication. For security reasons, Lockly™ will only accept
fingerprint patterns that consist of cross intersection points. Patterns with no
cross intersection points will not be acceptable.
Please check your fingers before registration to make sure the finger you
want to register will be acceptable by our system. Otherwise, use an
alternative finger to ensure successful registration.
The following examples show which types of fingerprint patterns will be
acceptable. It is highly recommended to enroll at least one finger from
each hand in case the hand you are using is unavailable, such as, in
instances like if you are holding items in that hand or have sustained an
injury.
Your Lockly
TM
can register up to ninety-nine (99) fingerprints. Please read
the following sections if you want to add or delete fingerprints. We
recommend using your app to add fingerprints, however, the following
section can show you without using the app.
Fingerprint Pattern with
Cross Intersection Lines
Concentric or Parallel Pattern
with no Cross Intersection Lines
Fingerprint with Scars or
Worn Out Ridges
OK Not OK Not OK
To Next Page
Loading...
Need help?
General
