Lockly Secure LUX User Manual

SECTION 2.6 7
With Random mode on, every time you enter a digit
while entering passcode, the display keypad will be
refreshed.
With Auto Lock enabled, the smart lock will automatically
relock the door 5s to 30s after unlocking.
Switch 1: Auto Lock (Default: ON)
Switch 3: Audio (Default: ON)
Switch 4: Random (Default: OFF)
Setting Switch
Enables the Audio sound (Beeper) when in the ON position.
Switch 2: Alarm Mode (Default: OFF)
With Alarm Mode on, the door reacts against external
activity according to the sensitivity level that has been set.
2.6 Setting Switch
2.7 Rebooting Lockly
TM
Secure
Press and release the reboot button when you want to reboot the lock. Your
Lockly™ will beep once after reboot. Only reboot when necessary.
To reboot, find the reboot button located below the keyhole from the exteri-
or of Lockly™ Secure Lux.
You will need something small such as a paperclip, to press the reboot
button. Insert the paper clip and press down firmly.
NOTICE
Reboot Lockly™ in case of dead battery or
malfunction. No settings will be changed and all
Access Codes will still be stored within Lockly™.
Reboot Button

Lockly Secure LUX Specifications

General

Brand	Lockly
Model	Secure LUX
Category	Door locks
Language	English