SECTION 3.4 15
NOTICE
There are two incidents where your Access Code
cannot be deleted.
3.4 Deleting an Access Code (Continued)
Once you have selected the Access Code
you want to delete, Lockly™ will ask you to
confirm deletion by showing you the
Access Code you are deleting, in this
example,
1 3 5 7 9 0.
Press to delete, or to cancel.
Only one Active Access Code
No Access Codes Set
There are no Access Codes
set. The factory default Access
Code cannot be deleted.
There is only one (1) Access Code saved
in the smart lock. At least one code must
be registered. Please add another Access
Code before attempting to delete the
existing code.
To Next Page
Loading...
