Lockly Secure LUX User Manual

SECTION 4.732
4.7 Safe Mode - Overview
Lockly™ will enter Safe Mode when three (3) consecutive wrong Access
Codes are entered within 5 minutes. When in Safe Mode, the lock status
icon will start to flash.
To disable Safe Mode, you must unlock the door using the correct finger-
print or enter the correct Access Code twice in a row. Activate the
keypad by pressing and holding for 3 seconds.
Once the screen is activated, enter the correct Access Code carefully
twice, pressing after every time.
If you enter the wrong code, the keypad will then be disabled for 10
minutes.
You will see a “10” on the screen, notifying the number of minutes that
the keypad is disabled for. After 10 minutes, you may attempt to enter
the correct Access Code to unlock the door. After the second incorrect
attempt to unlock the lock with the wrong Access Code, Lockly™ will
disable the keypad for 20 minutes, displaying a “20” on the screen. After
the third wrong attempt to unlock the door with the correct Access
Code, the screen will be disabled for 30 minutes. (Example A and Exam-
ple B above).
Note: In order to conserve power, the countdown prompt will only be
displayed for 3 seconds. You can reactivate the screen by sliding your
hand across the screen.
Countdown
Prompt
(Displayed in
Minutes)
Will start with 10
and countdown
until 0.
Example A Example B

Lockly Secure LUX Specifications

General

Brand	Lockly
Model	Secure LUX
Category	Door locks
Language	English