Lofa CANplus 1000 - Page 19

3. Display
– RPM Settings
*
Intermediate RPM
*
Run RPM
– Time Profile
*
Warm Up Time (s)
*
Ramp Up (s)
*
Intelligent Intermediate
*
Intermediate (s)
*
Ramp to Run (s)
*
Ramp Down (s)
*
Cool Down (s)
• Transducer
– Autostart Trigger
*
Autostart Trigger
· Transducer 1,2,3,4,5,6
*
High Set Point
*
Low Set Point
– Setup
*
Transducer 1-6
· Low Warning Alarm
· Low Shutdown Alarm
· High Warning Alarm
· High Shutdown Alarm
· Type & Range
• Scheduler
– Method
*
Allowed Times, Disabled, Override
– Schedule A-P
*
Days of the Week
*
Start Time hh:mm
*
Stop Time hh:mm
• Timed Run
– Default Time hh:mm
– Switch Adjustment hh:mm
• Cycle Time
– Default State
*
Stopped, Running
– Run Time hh:mm
– Stop Time hh:mm
• Auto Battery Recharge
Page 14 LOFA document No. 463-3002-59 Page 14