LOOP EV-Flex EVSE - System Configuration Settings

3.8. Conguration
3.8.A. Factory Settings
Clicking on the “Conguration” and then “Factory Settings” link will bring up the following screen:
Basic Information
Charge Point Vendor: The vendor’s name of the Loop EV-Flex EVSE.
Charge Point Model: The model’s name of the Loop EV-Flex EVSE.
Charge Point Serial Number: The unique serial number of the Loop EV-Flex EVSE.
Hardware Version: The hardware version of the Loop EV-Flex EVSE.
Firmware Version: The software version of the Loop EV-Flex EVSE.
30
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io