LOOP EV-Flex EVSE - Product Specifications; EVSE Technical Specifications

2. Product Specications
Item Loop EV-Flex EVSE
Application Commercial
Voltage (Vac) 208/240VAC, Single Phase
Frequency (Hz) 60 Hz
Current (Rms) 32 A
Charging Connector SAE J1772 Type 1
Charging Cable Length 25 ft.
Metering Accuracy
Embedded ± 1%
Real Time Clock Yes (7 days)
Indications
+ Green Steady: Ready
+ Green Flashing (Fast): Authorized, wait for EV Connect
+ Green Flashing (Slow): Suspend (Occupying)
+ Blue Flashing (Slow): Charging
+ Red Steady: Unrecoverable Fault
+ Red Flashing (Slow): Recoverable Fault
+ Yellow Steady: Out of Service
+ Yellow Flashing (Slow): Booting / Firmware Upgrading
Remark
+ Fast Flash: On Time 300ms, O Time 200ms, 2Hz
+ Slow Flash: On Time 1200ms, O Time 800ms, 0.5Hz
Wi-Fi 802.11 b/g/n
Cellular LTE Cat. 1 (AT&T or Verizon)
RFID
ISO 14443 A/B,
ISO 15693,
NFC,
NEMA interoperability protocol
Display
116(L)*8.5(W)*37(H)mm, 5.57mm CHARACTER HEIGHT, 5*8 DOT MATRIX,
OLED 20x2
Data Protocol OCPP 1.6
Operation Temperature
-30 ~ 50 ℃ / -22 ~ 122 ℉
Storage Temperature
-40 ~ 70 ℃ / -40 ~ 158 ℉
Mounting Type Wall mount / Pole mount (optional)
Wiring Type Hard-wired
IP Performance NEMA 4
Impact Resistance IK10
Dimension (H x W x D, inch) 11.14” x 7.56” x 3.11”
Weight (Net) 5.28 kg / 11.64 lbs
Web Portal Management Yes
Console Management Yes
Certication
Energy Star / UL 50/991/1449/1998/2231/2594 FCC Part 15B
FCC Part 15.225 (RFID 13.56MHz)
FCC Part 15.247 (WLAN 2.4GHz)
FCC Part 27 (AT&T) or
FCC Part 27 (Verizon)
8
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io