3.11.B. Gateway/Client Group Table
If the Loop EV-Flex EVSE is Gateway, the following LLM Group Table is present.
Index: The order of the Loop EV-Flex EVSE. The index is rst connected to Gateway rst showed.
Serial Number: The serial number (Loop EV-Flex EVSE Identity) of each Loop EV-Flex EVSE.
IP: The private local IP address in LLM group of each Loop EV-Flex EVSE.
Wire Type: The power source wire type of each Loop EV-Flex EVSE.
Request: The requested current of each Loop EV-Flex EVSE
PWM: The PWM (charger allowed) current of each Loop EV-Flex EVSE
Phase 1, Phase 2, Phase 3: The real current loaded by the vehicles of each Loop EV-Flex EVSE.
For Intelligent Charger-32A only Phase 1 has current.
3.12. Security
3.12.A. Change Password
To change password, rst choose user you want to change password. There are two default users – admin and maintain.
Only admin user can access Security Page. Enter old password and new password then press “Apply” button to change
password of the user.
To reset password of all users, press “Reset password of all users” button.
56
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io
To Next Page
Loading...
