LOOP EV-Flex EVSE - OCPP Settings

3.8.C. OCPP Settings
Clicking on the “Conguration” and then “OCPP Settings” link will bring up the following screen. Since the page is
too long to display, please use the scrollbar to view the entire page.
On this page you can change the properties just for the Loop EV-Flex EVSE. Click the “Apply” button
at the right side of the property when the value is changed.
Remote Control Settings
Remote Control Type: The remote control mode accept by LOOP EV-Flex EVSE. Options are
APP: Can be remote controlled by mobile APP.
OCPP: Can be remote controlled by OCPP 1.6 protocol.
APP+OCPP: Both APP and OCPP are accepted.
35
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io