LOOP EV-Flex EVSE - Maintenance, Recovery, and Support

4.4.C. Power Outage Recovery
When power resumes after an outage, the Loop EV-Flex EVSE restarts automatically with a delay ranging from 120
to 720 seconds. The delay is designed to avoid impacting the utility grid when multiple Loop EV-Flex EVSEs are in
the same area attempting to resume charging simultaneously.
4.5. General Care
The exterior of the Loop EV-Flex EVSE is designed to be waterproof and dust proof. To ensure proper maintenance of
the Loop EV-Flex EVSE, follow these guidelines:
+ Despite the water resistance of the enclosure, when cleaning it is preferred to not direct streams of water at the
unit. Clean with a soft, damp cloth.
+ Make sure the charging plug is put back in the holster after charging to avoid damage.
+ Ensure the power cable is stored on the Loop EV-Flex EVSE after use to avoid damage.
+ If the power cable or the charging plug is damaged, please contact Customer Support.
4.6. Customer Support
Please contact
+ support@evloop.io
+ 888-EVLOOP1 (888-385-6671)
61
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io