LOOP EV-Flex EVSE - Safety and Compliance; Important Safety Instructions; Safety Symbols and Precautions

Important Safety Instructions
This document contains instructions and warnings that must be followed when installing and using the Electric Vehi-
cle Supply Equipment (EVSE). Before installing or using the EVSE, read this entire document as well as WARNING and
CAUTION markings in this document.
Safety Instructions
The symbols used have the following meaning:
WARNING: RISK OF PERSONAL INJURY
WARNING ELECTRIC: RISK OF SHOCK
WARNING: RISK OF FIRE
CAUTION: RISK OF DAMAGE TO THE EQUIPMENT
+ The Loop EV-Flex EVSE must be installed only by licensed electricians.
+ Make sure that the materials and installation procedures follow local building codes and safety standards.
+ The information provided in this manual in no way exempts the user of responsibility to follow all applicable
codes or safety standards.
+ This document provides instructions for the Loop EV-Flex EVSE and should not be used for any other product. Be-
fore installation or use of this product, review this manual carefully and consult with a licensed contractor, licensed
electrician, or trained installation expert to ensure compliance with local building codes and safety standards.
4
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io