LOOP EV-Flex EVSE - Page 36

Service Settings
Charge Point ID: The identity of the Loop EV-Flex EVSE as known in the OCPP Central System.
Protocol Name: The name and version of OCPP is running in the Loop EV-Flex EVSE.
Central System URL: The URL of the OCPP v1.6 Central System service.
Basic Auth ID: The ID for BASIC authentication in HTTPS (SSL/TLS) connections.
Basic Auth Password: The password for BASIC authentication in HTTPS (SSL/TLS) connections
FTP Server Username: The username of the FTP Server for OCPP to download rmware les and upload
diagnostic le.
FTP Server Password: The password of the FTP Server for OCPP to download rmware les and upload
diagnostic le.
Message Transport Layer: Select the transport layer of the OCPP service that will be used. For Intelligent
Charger-32A, the available option is WS and WSS.
WS: Connection from Loop EV-Flex EVSE to OCPP Server uses WebSocket protocol.
WSS: Connection from Loop EV-Flex EVSE to OCPP Server uses Secure WebSocket protocol.
Boot Notication Interval: Interval of re-sending BootNotication.req if not accepted by Central System.
Boot Notication Retries: Number of times to retry sending BootNotication.req.
“-1” means unlimited
“0” means don’t retry.
PDU Timeout: Interval until the Loop EV-Flex EVSE stop waiting for a PDU response.
Download Firmware Interval: Interval of downloading rmware from Central System.
Download Firmware Retries: Number of times to retry downloading rmware.
Upload Diagnostics Interval: Interval of uploading diagnostic le to Central System.
Upload Diagnostics Retries: Number of times to retry uploading diagnostic le.
36
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io