EasyManua.ls Logo

LOOP EV-Flex EVSE - Page 6

LOOP EV-Flex EVSE
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Save These Instructions
WARNING ELECTRIC: RISK OF SHOCK
Basic precautions should always be followed when using electrical products, including the following:
+ Read all the instructions before using this product.
+ This device should be supervised when used around children.
+ Do not put ngers into the EV connector.
+ Do not uses this product if the exible power cord or EV cable is frayed, has broken insulation, or any
other signs of damage.
+ Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other
indication of damage.
WARNING: RISK OF ELECTRIC SHOCK
Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check
with a qualied electrician or serviceman if you are in doubt as to whether the product is properly
grounded.
WARNING: RISK OF ELECTRIC SHOCK
+ Do not touch live electrical parts.
+ Incorrect connections may cause electric shock.
WARNING:
This equipment is intended only for charging vehicles that do not require ventilation during charging.
Please refer to your vehicle’s owner’s manual to determine ventilation requirements.
WARNING:
Do not use extender cables to increase the length of the charging cable. Maximum length is limited to 25
feet by the National Fire Protection Agency.
WARNING: Do not drag the Loop EV-Flex EVSE by input power cord.
6
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io

Related product manuals