Connecting to Your DVR Over the Internet on PC or Mac
16
To find the Device ID:
1. The Device ID is located on a sticker on the DVR.
You can also find the Device ID by:
• Pressing the
button on the front panel or remote control to open the System In-
formation window.
OR
• Right-clicking and then clicking the Main Menu button ( ). Enter the DVR pass-
word (default: 000000). Then click System>Info.
2. Write down the Device ID of the DVR.
16.4 Step 3 of 3: Connect to the DVR Over the Internet
Follow the steps below to connect to the DVR over the Internet using a PC or Mac.
NOTE
Make sure to upgrade your DVR to the latest firmware version. You must have the latest DVR firm-
ware and client software to connect to the DVR over the Internet.
PC
1. Download and install the Client Software for PC from www.lorextechnology.com.
#LX400066; r. 1.0/26388/26388; en-US
66
To Next Page
Loading...
Need help?
General
