Using the PC/Mac Client Software
17
You must have the latest DVR firmware and client software to connect to the DVR over the
Internet.
To upgrade the system firmware:
1. Download and extract the file to your computer’s desktop.
2. Click the Remote Setting tab, and click Advanced>Firmware upgrade.
3. Beside Upgrade File Path, click the browse button (...). Locate the firmware, and click
Open.
4. Click Start to begin the firmware upgrade.
5. Follow the on-screen instructions to complete the firmware upgrade.
CAUTION
DO NOT POWER OFF THE DVR OR DISCONNECT THE POWER CABLE DURING A FIRMWARE UP-
GRADE. Your system will restart during the firmware upgrade process.
17.27 Restoring Default Settings
1. Click the Remote Setting tab, and click Advanced>Load Default.
2. Select the menus that you wish to restore to factory defaults.
3. Click Save to restore system defaults for the selected items.
#LX400066; r. 1.0/26388/26388; en-US
86
To Next Page
Loading...
Need help?
General
