62
1. Insert the MMC card into your unit. Press
MENU|MENU|↓ to SYSTEM
SETUP|ENT|↓ to TRANSFER MY DATA|ENT.
To transfer data from the iFINDER to the MMC, press
ENT.
To transfer data from the MMC to the iFINDER, press → to
LOAD|ENT.
2. Saving to MMC: If you want to rename the file, press
ENT to acti-
vate the File Name selection box. Press ↑ or ↓ to change the first char-
acter, then press → to the next character and repeat until the name is
correct. Then, press
ENT|↓ to SAVE DATA|ENT. To accept the default
name Data for the GPS Data File, press ↓ to
SAVE|ENT.
The unit will display a completion message when the data transfer is
finished. To return to the main page display, press
EXIT repeatedly.
3. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT to activate the User
Data File selection box. Use ↓ or ↑ to highlight the file you want to
load, then press
ENT. Next, press ↓ to LOAD|ENT. The unit will display a
completion message when the data transfer is finished. To return to the
main page display, press
EXIT repeatedly.
Utilities
Utilities are useful tools for traveling or for outdoor activities.
Sun/Moon Calculation
To access the Sun/Moon Calculation menu, press
MENU|MENU|↓ to
UTILITIES|ENT|ENT.
Trip Calculator
To access the Trip Calculator, press
MENU|MENU|↓ to UTILITIES|ENT|↓
to
TRIP CALCULATOR|ENT. See more information on Trip Calculator below.
Alarm Clock
To access the alarm clock menu, press
MENU|MENU|↓ to UTILI-
TIES
|ENT|↓ to ALARM CLOCK|ENT.
Down Timer
To access the Down Timer menu, press
MENU|MENU|↓ to UTILI-
TIES
|ENT|↓ to DOWN TIMER|ENT.
Up Timer
To access the Up Timer menu, press
MENU|MENU|↓ to UTILITIES|ENT|↓
to
UP TIMER|ENT.
To Next Page
Loading...
