70
1. Latitude: select
LATITUDE and press ENT. Use ↑ ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
EXIT.
2. Longitude: press ↓ to
LONGITUDE|ENT. Use ↑ ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
ENT.
3. When latitude and longitude are correct press
EXIT repeatedly to get
back to the main page display.
Waypoint Altitude
To edit waypoint altitude, press FIND|↓ to MY WAYPOINTS|ENT. Use ↓ and
↑ to select a waypoint name|
ENT|→ to EDIT ALTITUDE|ENT.
1. Use ↑ or ↓ to change the first character, then press → to the next
character and repeat until altitude is correct. Press
ENT.
2. To return to the main page display, press EXIT|EXIT.
To Next Page