Chapter 6 Instruction Details
XBC E-Type Main Unit 6-278 Ve r. 1
output D
input S1
S2
S3
S2+1
S3+1
(7) The result of the operation of INT/DINT type is represented rounded off to one decimal place.
(8) Be cautious when using more than ±1.000e+010 as a numerator or less than ±1.000e-010 as a denominator
because out of the range of expressable max./min. value, in the operation of REAL type, is represented
as ±1.INF00000e+000
(9) If operation result exceeds the max./min. value that is available in the REAL type operation process, it is
expressed as ±1.INF00000e+000. So when using more than ±1.000e+010 in numerator or less than
±1.000e-010 at denominator, be careful.
(10) When operating DINT type, if setting value is more than 10 million, error may occur.
To Next Page
Loading...
