Chapter 7 Built-in High-speed Counter Function
XBC E-Type Main Unit 7-27 Ver. 1
7.3 Examples: Using High-speed Counter
1. Setting high-speed counter parameter
How to set types of parameters to operate a high-speed counter is described as follows.
a. Set 『Internal Parameters』 in the basic project window.
b. Selecting high-speed counter opens a window to set high-speed counter parameters as
follows.
For details regarding each parameter setting, refer to 9.1~9.3.
(Every parameter settings are saved in the special K device area.)
To Next Page
Loading...
