7
1.7 Protection against Touching Hot Parts
CAUTION
Surfaces of the housing can be hot! Risk of injury! Risk of burns!
⇒ Do not touch parts of the housing that are close to heat sources! Risk of
burns!
⇒ Let the device cool down for 15 minutes before touching the surface of its
housing.
⇒ The housing top and the heat sinks may have a surface temperature of
75 °C if the ambient temperature is 45 °C!
1.8 Setting the Country Code
CAUTION
The selected country code can only be changed by Service personnel!
After having set and confirmed the country code, you cannot change it yourself
any longer.
This is also applicable to devices which are or were in operation. According to
a new rule, the country code can now only be changed by Service personnel.
CAUTION
Cancellation of the operating license!
If the LSPV inverter is operated with a wrong country code, the electric supply
company may cancel the operating license.
Note: We do not assume any liability for an incorrectly set country code!
The pertinent regulations of the responsible power supplier must be
observed!
To Next Page
Loading...
Need help?
General
