8
1.9 Protection when Handling and Assembling
If conditions are unfavorable, handling and assembling certain parts and components in an im-
proper way can cause injuries.
CAUTION
Risk of injury by improper handling! Personal injury by crushing, shearing,
cutting, striking or lifting!
⇒ Observe the general construction and safety regulations on handling and
assembly.
⇒ The weight of the LSPV inverter is 40 kg!
⇒ Use suitable assembly and transport equipment.
⇒ Take appropriate measures to prevent squeezing and crushing.
⇒ Only use suitable tools. Use special tools if specified.
⇒ Use lifting equipment and tools in the correct manner.
⇒ If necessary, use suitable protective equipment (for example safety gog-
gles, safety shoes, safety gloves).
⇒ Do not stand under suspended loads.
⇒ Immediately clean up any spilled liquids to avert the danger of slipping.
1.10 Disposal
Note: The LSPV inverter complies with the RoHS Directive. That means
that the device can be delivered to local sites for the disposal of
household appliances.
LSIS takes the PV inverter completely back. Please contact the
Service!
Dispose of the packaging and replaced parts according to the
rules applicable in the country where the device is installed.
Do not dispose of the SOLARVERT inverter with normal domes-
tic waste.
To Next Page
Loading...
Need help?
General
