Figure 8-13 Villa Door Station No. Settings
2. Select the device type from the drop-down list, and set the corresponding information including
Building No., Floor No., Door Station No., Community No. and Unit No.
Note
When you select Outer Door Station as Device Type, only Community No. and Outer Door No.
can be set.
3. Click Save to enable the device number configuration.
Linked Network Settings
Steps
1. Click Intercom → Session Settings to enter the settings page.
Figure 8-14 Session Settings
2. Set Registration Password.
3. Set Main Station IP and Video Intercom Server IP.
4. Enable Protocol 1.0.
To Next Page
Loading...
