5. Click Save to enable the settings.
Time Parameters
Go to Intercom → Call Settings to enter the page.
Configure Max. Communication Time and Max. Message Duration and click Save.
Note
● Max. communication time between the module indoor station and client ranges from 90 s to
120 s. The call will end automatically when the actual calling duration is longer than the
configured one.
● Max. message duration ranges from 30 s to 60 s. The message will end automatically when the
actual message duration is longer than the configured one.
Press Button to Call
Steps
1. Click Intercom → Press Button to Call to enter the settings page.
2. Click Call Schedule Settings to create a new template plan.
1) Set Schedule Name.
2) drag to set weekly schedule for indoor station and center.
3) Click Add, set specific Start Time and End Time, and drag to set schedule for indoor station
and center.
4) Click Save.
3. Click to configure Button Settings and select a call schedule.
4. Click Save.
Number Settings
Link the room No. and SIP numbers.
Click Number Settings to enter the page.
To Next Page
Loading...
