Lucent Technologies KS-20472 - Maintenance Schedules

Lucent Technologies Round Cell Batteries
7 - 2 Operation and Maintenance Issue 3 December 1999
Recommended Procedures and Intervals
Reference Tables
Safety Read Section 4, Safety, before performing the maintenance procedures.
Table 7-A: Monthly Maintenance Procedures
Procedure
Check and record battery float voltage.
Table 7-B: Quarterly Maintenance Procedures
Procedure
Check and record individual cells for crystals.
Check and record reference cell temperature.
Check electrolyte levels.
Table 7-C: Annual Maintenance Procedures
Procedure
Check individual cell float voltages.
Check battery cycle monitor (if applicable).
Inspect battery jars and stands.
Inspect, clean, or replace safety vent funnel, if required.
Table 7-D: At 5-year Intervals Maintenance Procedures
Procedure
Check battery connections.
Perform discharge capacity test, if required.