Lucent Technologies Round Cell Batteries
4 - Table of Contents Issue 3 December 1999
Check Battery Cycle Monitor 7 - 9
Interval 7 - 9
Guidelines 7 - 9
Inspect Battery Jars and Stands 7 - 10
Interval 7 - 10
Cleaning Cell Jars and Covers 7 - 10
Cleaning Battery Stands, Cabinets, and Miscellaneous
Equipment 7 - 11
Inspect, Clean, or Replace Safety Vent Funnel 7 - 12
Interval 7 - 12
Guidelines 7 - 12
Procedure 7 - 12
Check Battery Connections 7 - 13
Interval 7 - 13
Guidelines 7 - 13
Safety 7 - 13
Corrosion 7 - 14
Opening Battery Connections 7 - 14
Cleaning Battery Connections 7 - 15
Perform Discharge Capacity Test 7 - 16
Interval 7 - 16
Guidelines 7 - 16
Procedure 7 - 16
Measure Specific Gravity 7 - 18
Guidelines 7 - 18
Replace a Cell in an Existing String 7 - 19
Introduction 7 - 19
String Disconnected from Load/Charger 7 - 20
String Connected to Load/Charger 7 - 21
Replace or Add a String to an Existing Plant 7 - 23
Guidelines 7 - 23
Gassing Rate 7 - 24
8 Discharge and Power Data
Overview 8 - 1
In This Section 8 - 1
Battery Discharge Capacity Tables 8 - 1
9 Installation and Maintenance Records
Overview 9 - 1
Introduction 9 - 1
Storage Battery Report 9 - 1
Battery Maintenance Record 9 - 1
To Next Page
Loading...