Lumel ND30PNET - Analog output

ND30PNET-09 - User's Manual
23
7.4 Analog output
Select Analog output in the options and confirm by pressing the button
Select
Fig.18. Screen of Analog output group
Table 3
No.
Parameter name
Characteristic / value
Description
Default
value
1
Value
U1,I1,...,T2,hh:mm
Value at the analog output,
parameter acc. to table 8
P
2
Output range
0...20mA,4...20mA,
Range of analog output
0...20mA
3
Low limit input
-144.0 .. 144.0%
Lower value of the input range
in % of the nominal range
0.0
4
High limit input
-144.0 .. 144.0%
Upper value of the input range
in % of the nominal range
100.0
5
Low limit output
00.00 .. 24.00
Lower value of the output
range of the output in mA
0.00
6
High limit output
0.01 .. 24.00
Upper value of the output
range of the output in mA
20.00
7
Out mode
Normal
Low limit output
High limit output
Constant output operating mode.
Normal