Lumel RE72 User Manual

16
16
6.3. Setting Change
The change of the parameter setting begins after pressing the
push-button during the display of the parameter name. The set-
ting selection is carried out through and push-buttons,
and accepted by the push-button. The change cancellation fol-
lows after the simultaneous pressing of and push-but-
tons or automatically after 30 sec since the last push-button pressure.
The way to change the setting is shown on the fi g. 15.
Fig. 15. Change of number and text parameter settings
Beginning
of changes
Cancelation
of changes
Acceptation
of changes
+

Lumel RE72 Specifications

General

Brand	Lumel
Model	RE72
Category	Controller
Language	English