Lumel RE72 User Manual

51
51
13. PROGRAMMING CONTROL
13.1. Description of Programming Control Parameters
List of confi guration parameters Table 5
prg – Programming control
pr01
Sub-menu of the program no 1
...
pr15
Sub-menu of the program no 15
PCfg
Sub-menu of program parameters
Parameter
symbol
Parameter
description
Manufac-
turer’s
setting
Range of parameter
change
Sensors
Linear
input
strt
Way to begin
the program
pu
sp0: from the way
defi ned by SP0
pu: from the currently
measured value
sp0
Initial set
point value
0.0 °C MIN…MAX
1)
tMun
Unit for the
segment du-
ration time
mMss
mMss: minutes and
seconds
HH.mm: hours and
minutes
rRun
Unit for the
accretion rate
of the set point
value
min. min: minutes
Hour: hours
hold
Locking of
the control
deviation
dis
dis: inactive
lo: lower
Hi: upper
band: reversible

Lumel RE72 Specifications

General

Brand	Lumel
Model	RE72
Category	Controller
Language	English