15. SOFTWARE UPDATING
Function enabling updating of software from the computer of the PC
with software eCon was implemented in controller RE72 (from version
of software 2.00). Free software eCon and update fi les are available
at www.lumel.com.pl. The connected to the computer convertor RS485
is required on USB to the updating, e.g.: the convertor PD10.
a)
b)
Fig.28. Program view: a) eCon, b) updating of software
Warning! Before doing update, currently settings of controller
should be saved by program eCon, because when software is updated
default settings of controller are restored.
After starting eCon’s software COM port, baudrate, transmis-
sion mode and adress should be set. It can be done in Communication
window. Then, RE72 controller should be selected in the window Select
device and push icon Load in window Communication and then the icon
to read the current settings. Open window Lumel Updater (LU) –
To Next Page
Loading...
