Lumel RE72 User Manual

64
64
4016 DP RW
0…1
3) 4)
0…2
5)
Position of the decimal point of the
main input:
0 – without decimal place
1 – 1 decimal place
2 – 2 decimal places
4017 INLO RW -999…9999
1)
Indication for the lower threshold of
the analog main input.
4018 INHI RW -999…9999
1)
Indication for the upper threshold of
the analog main input.
4019 SHIF RW -999…999
1)
Shift of the measured value of the
main input.
4020 I2TY RW 0…1
Kind of the additional input:
0 – current inpur: 0-20mA
1 – current input: 4-20mA
4021 DP2 RW 0…2
Position of the decimal point of the
additional input.
0 – without a decimal place
1 – 1 decimal place
2 – 2 decimal places
4022 I2LO RW -999…9999
1)
Indication for the lower threshold of
the analog main input.
4023 I2HI RW -999…9999
1)
Indication for the upper threshold of
the analog main input.
4024 FILT RW 0…9
Time-constant of the fi lter:
0 – OFF
1 – 0.2 sec
2 – 0.5 sec
3 – 1 sec
4 – 2 sec
5 – 5 sec
6 – 10 sec
7 – 20 sec
8 – 50 sec
9 – 100 sec

Lumel RE72 Specifications

General

Brand	Lumel
Model	RE72
Category	Controller
Language	English