D : In this setting function ( Year → Minute ), press ▲ or
▼ in addition to adjust the numbers, and the setting
value will also be saved during the adjusting.
E : In the function of setting " second ", press ▲ or ▼
to adjust numbers. at this point the number of second
is at a standstill condition and then press setup key
that will save setting value and also start counting
function of " second ".
screen 1 ( 4-5-16 )
Folder Name: WTA01
File Name: 3P401001.XLS
REC Date: 2008-11-28 00:03:17
Sampling Time: 2 Trans Ref : 220.0 V
Delete File: 0 % SDVP : 10%
SD Format: 0 % Decimal: Basic
Use Size: 388 KB Clamp Type: CP1201
Free Size: 1946 MB A Range: 200A
Total Size: 1946 MB V Range: 200mV
RS232 Out Sel:
PT: 1 : 1 V1 I1 P1
CT: 1 : 1 S1 Q1 PF1
Beep: ON Φ1 FREQ
Month Date Hour Minute Second
2010 11 13 14 37 25
44
To Next Page
Loading...
