Mabit SmartControl - Page 51

- 51 -
MAB 2010280101 EN V2.2
www.mabit.pl
info@mabit.pl
Upon encountering each error, SmartControl will display the following information:
Name
Description
TimeOut exceeding of the awaiting response time of the slave
CheckSum incorrect checksum
Error type
Code nr error code corresponding with the protocol
Main Main
Channel
Second
Second
Reading reading register value from the controller
Direction of data flow
Entry entry of register value to the controller
TimeOut
CheckSum
Code nr
The information will disappear after about 2 seconds. To extend the time of
display press and hold any key on the keyboard.
Main
Second
Reading
Entry