Mackie TT24 - Page 26

Mackie TT24 Digital Live Console Quickstart Guide Quickstart Tutorial
26
The EQ has six bands
:
• two full parametric bands (bands 2 and 3)
;
•high
-
and low
-
shelf filters (bands 1 and 4)
;
• two Kill filters (bands 5 and 6) to remove narrow bands of unwanted
frequencies. Push the Kill filter knobs to cycle through
-
6,
-
12, or
-
18 dB. As the amount of cut increases, the filter Q increases (i.e.,
bandwidth narrows). Turn the knob to adjust the frequency.
The channel aux levels are set with the channel V
-
Pots by pressing the desired
Aux number in the V
-
POT CONTROL area. All 12 Aux levels for a selected
channel can be set by pressing the GRP/AUX QuickMix button.
Aux Routing Examples
To send mic channel 1 to all monitors
:
1. Press channel 1’s SELECT button.
2. Press the GRP/AUX QuickMix button.
3. Adjust the QuickMix knobs to set each Aux level.
To set one monitor mix
:
1. Press the desired Aux number button in the AUX SENDS area.
2. Use each channel’s V
-
Pots to set the mix.