MAINTENANCE CERTIFICATES
GENERAL INFORMATION
118 Maintenance manual T225/T230
General information
To maintain the operational safety of your Trac, the prescribed
maintenance work needs to be done regularly and punctually.
Always have the maintenance work performed by a qualified
shop.
Have the completed maintenance work confirmed with
operating hours number, date, signature and the company
stamp of a qualified shop.
Only maintenance or additional work that has been entered in
the certification boxes and confirmed as described above is
considered to have been carried out validly.
Please take into consideration that if the maintenance work is
not properly documented, the warranty and liability claims
towards MAFI become void.
The maintenance schedule (see “Maintenance
schedule” on page 34) contains the maintenance
intervals and which maintenance work must be carried
out during these intervals.
Note that after every 2000 operating hours, the
maintenance tasks are repeated, starting at
500 operating hours.
To Next Page
Loading...
