MAINTENANCE WORK
WHEELS AND TYRES
Maintenance manual T225/T230 91
Checking wheels/tyres
Before beginning to drive check the tyres and wheels of the
MT for:
z correct air tyre (10 bar when tyres are cold),
z external damage of the tyres,
z sufficient thread,
z foreign objects in the tyre thread,
z foreign objects between the twin wheels,
z damaged wheel rims,
z missing or loose wheel bolts / wheel nuts.
Tyre-inflating connection
Fig. 61: Tyre-inflating connection
The tyre-inflating connection can be used for filling the tyres in
an emergency.
The tyre-inflating connection is located in the compressed air
tanks.
Tyre pressure
X Start the motor.
X Remove the protection cap from the tyre-inflating
connection.
X Attach the tyre-inflating hose (not part of the scope of
delivery).
X Inflate the tyres.
X Drive to the garage and inflate the tyres to the specified
pressure.
The output of the compressor is not enough to inflate
the tyres to the specified tyre pressure.
To Next Page
Loading...
