Magellan eXplorist Dashboard
Magellan eXplorist 310 User Manual 10
Customising Data Fields
Setting the Number of Fields Displayed
1. Access the Dashboard screen on which you
wish to change the number of displayed elds.
2. Press MENU.
3. Select Edit # of Fields. (Not available on the
Satellite Status screen.)
4. The current number of elds being displayed is
shown with an arrow above and below it.
5. Use the joystick up or down to change the
number of elds to be displayed. (Note:
itstops increasing when it gets to the
maximum number of elds available for the
vieweddashboard screen. The number of
displayed elds can be set to 0 except for the
Data Onlyscreen which has a minimum of 1.)
Changing Displayed Data
1. Access the Dashboard screen on which you
wish to change the data displayed.
2. Press MENU.
3. Select Edit Nav Fields. (Not available on the
Satellite Status screen.)
4. Select the type of data to be displayed from
the displayed list.
5. The Dashboard screen is displayed with the
data selected displayed.
To Next Page
Loading...
