EasyManuals Logo

Magellan eXplorist 310 User Manual

Magellan eXplorist 310
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Magellan eXplorist Settings
Magellan eXplorist 310 User Manual 25
Toggling the Arrival Alarm
1. Access the Settings Menu.
2. Select Alarms.
3. Select the Arrival drop-down menu and select
if the arrival alarm will sound when you have
reached your destination.
Dening the Arrival Alarm
1. Access the Settings Menu.
2. Select Alarms.
3. Select the Arrival Distance drop-down menu
and select the distance from your destination
that the arrival alarm will sound.
Setting the Waypoint Proximity Alarm
1. Access the Settings Menu.
2. Select Alarms.
3. Select the Waypoint Proximity drop-down
menu and dene the distance to a waypointthat
an alarm will sound.
Night Mode
Setting the Use of Night Mode
1. Access the Settings Menu.
2. Select Night Mode.
3. Select the desired option (Auto, On or Off).
Joystick Functions
This denes what function will be accessed
whenpressing on the joystick while viewing the Map
screen.
Assigning Joystick Functions
1. Access the Settings Menu.
2. Select Joystick.
3. Select Add Waypoint (default) or Display
Dashboard.
Compass
This denes what graphic will be used to display the
compass on the Map screen.
Setting Speed Units of Measure
1. Access the Settings Menu.
2. Select Units.
3. Select the Speed drop-down menu and select
the desired units of measure.
Setting Elevation Units of Measure
1. Access the Settings Menu.
2. Select Units.
3. Select the Elevation drop-down menu and
select the desired units of measure.
Setting Area Units of Measure
1. Access the Settings Menu.
2. Select Units.
3. Select the Area Units drop-down menu and
select the desired units of measure.
Tracks
This setting sets the interval that track points will be
saved. Auto uses an internal formula that increases
the number of track points saved during turns and
decreases the number of points saved when travelling
in a straight line.
Setting Track Logging Mode
1. Access the Settings Menu.
2. Select Tracks.
3. Select the Logging Mode drop-down menu and
set the interval for recording track points.
Note if you select “Time” or “Distance” you will
need to set the time or distance intervals from
the additional drop-down menu.
Alarms
Setting the Off Course Alarm
1. Access the Settings Menu.
2. Select Alarms.
3. Select the Off Course drop-down menu and
dene the distance that when of course that an
alarm will sound.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Magellan eXplorist 310 and is the answer not in the manual?

Magellan eXplorist 310 Specifications

General IconGeneral
Golf-
Sport (fitness, running)Yes
Marine (chartplotters, sounders)No
Tracks quantity1
Number of waypoints500
GPS accuracy - position5 m
Map coverageWorld
Display diagonal2.2 \
Display resolution240 x 320 pixels
Storage media typeFlash
Internal storage capacity0.5 GB
Processor modelSiRFStar III
Processor frequency400 MHz
Form factorHandheld
Product colorGrey, Orange
International Protection (IP) codeIPX7
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Battery typeAA
Power source typeBattery
Battery life (max)18 h
Battery technologyAlkaline
Number of batteries supported2
Operating temperature (T-T)-10 - 60 °C
Weight and Dimensions IconWeight and Dimensions
Depth36 mm
Width56 mm
Height111 mm
Weight147 g

Related product manuals