Magellan eXplorist 310 - Selecting the North Reference; Setting the Altimeter Source; Memory; Clearing Memory from Device

Magellan eXplorist Settings
Magellan eXplorist 310 User Manual 27
3. Select Audio Test.
Running the Video Test
1. Access the Settings Menu.
2. Select Diagnostics.
3. Select Video Test.
Running the Video Test
1. Access the Settings Menu.
2. Select Diagnostics.
3. Select Keypad Test.
Language
Selecting the Language
1. Access the Settings Menu.
2. Select Language.
3. Select desired language to use.
4. Conrm changing the language.
Product Information
Viewing the Receiver Serial Number
1. Access the Settings Menu.
2. Select Product Information.
3. The serial number for the receiver is displayed
at the top of the screen.
Viewing the SW Version, EULA or Copyright
Information
1. Access the Settings Menu.
2. Select Product Information.
3. Select Versions, EULA or Copyright Info.
Selecting the North Reference
1. Access the Settings Menu.
2. Select Navigation.
3. Select the North Reference drop-down menu
and select the north reference.
Setting the Altimeter Source
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Altimeter drop-down menu and
select the desired source.
Memory
This setting is used to view memory usage and
provides access to memory tools.
Clearing Memory from Device
1. Access the Settings Menu.
2. Select Memory.
3. Select Clear Memory from Device.
4. Conrm that you want to clear the
deviceswaypoint, geocache, route memory.
Restoring Factory Defaults
1. Access the Settings Menu.
2. Select Memory.
3. Select Restore Factory Default.
4. Conrm that you want to restore the factory
defaults.
Connectivity
Setting Receiver Connectivity
1. Access the Settings Menu.
2. Select Connectivity.
3. Select the Mode drop-down menu and select
the desired connectivity mode.
Diagnostics
Running the Audio Test
1. Access the Settings Menu.
2. Select Diagnostics.