EasyManuals Logo

Magellan eXplorist 310 User Manual

Magellan eXplorist 310
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Magellan eXplorist Settings
Magellan eXplorist 310 User Manual 26
Setting the Primary Coordinate Type
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Primary Coordinate Type drop-down
menu and select the desired measurement.
Setting the Primary Coordinate Accuracy
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Primary Coordinate Accuracy drop-
down menu and select the desired accuracy.
Setting the Primary Coordinate Datum
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Primary Coordinate Datum drop-
down menu and select the desired datum.
Setting the Secondary Coordinate System
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Secondary Coordinate System drop-
down menu and select the desired coordinate
system.
Setting the Secondary Coordinate Type
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Secondary Coordinate Type
drop-down menu and select the desired
measurement.
Setting the Secondary Coordinate Accuracy
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Secondary Coordinate Accuracy
drop-down menu and select the desired
accuracy.
Setting the Secondary Coordinate Datum
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Secondary Coordinate Datum drop-
down menu and select the desired datum.
Assigning the Compass Graphic
1. Access the Settings Menu.
2. Select Compass.
3. Select the left and right arrows to set through
the available compass graphics.
4. Press the joystick to select the compass
graphic.
Background
This denes what graphic will be used as the
background for the receiver
Assigning the Background Graphic
1. Access the Settings Menu.
2. Select Background.
3. Select the left and right arrows to set through
the available graphics.
4. Press the joystick to select the background.
Satellite
Viewing the Satellite Status Screen
1. Access the Settings Menu.
2. Select Satellite.
3. Select the Back Icon to exit.
GPS
Turning the GPS Receiver On/Off
1. Access the Settings Menu.
2. Select GPS.
3. Select the GPS drop-down menu and select
On or Off.
Navigation
Setting the Primary Coordinate System
1. Access the Settings Menu.
2. Select Navigation.
3. Select the Primary Coordinate System drop-
down menu and select the desired coordinate
system.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Magellan eXplorist 310 and is the answer not in the manual?

Magellan eXplorist 310 Specifications

General IconGeneral
Golf-
Sport (fitness, running)Yes
Marine (chartplotters, sounders)No
Tracks quantity1
Number of waypoints500
GPS accuracy - position5 m
Map coverageWorld
Display diagonal2.2 \
Display resolution240 x 320 pixels
Storage media typeFlash
Internal storage capacity0.5 GB
Processor modelSiRFStar III
Processor frequency400 MHz
Form factorHandheld
Product colorGrey, Orange
International Protection (IP) codeIPX7
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Battery typeAA
Power source typeBattery
Battery life (max)18 h
Battery technologyAlkaline
Number of batteries supported2
Operating temperature (T-T)-10 - 60 °C
Weight and Dimensions IconWeight and Dimensions
Depth36 mm
Width56 mm
Height111 mm
Weight147 g

Related product manuals