20
Power Options
Set Suspend Timer
To help conserve battery life you can set a time duration that puts the receiver into suspend mode
automatically if no keys have been pressed. During suspend mode the receiver is in power save
mode but continues to log your track and compute your current position.
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Power’ and press ENTER.
3. Highlight the ‘Active Suspend Timer’ field.
4. Use the joystick to select the desired time or ‘Never’.
5. Press BACK.
Set Power Off Timer
The Power Off Timer turns the receiver off if it hasn’t received any key presses within the time
selected.
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Power’ and press ENTER.
3. Highlight the ‘Power OFF Timer’ field.
4. Use the joystick to select the desired time or ‘Never’.
5. Press BACK.
Select the Type of Batteries Used
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Power’ and press ENTER.
3. Highlight the ‘Battery Type’ field.
4. Use the joystick to select the type of batteries being used.
5. Press BACK.
Units of Measure Options
Selecting Units of Measure
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Units’ and press ENTER.
3. Highlight the field with the desired units of measure.
4. Press ENTER.
5. Press BACK.
Date and Time Options
Selecting Date Format
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Date & Time’ and press ENTER.
3. Use the joystick to select the date format.
4. Press ENTER.
5. Press BACK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
