23
Track Options
Turning Tracking On/Off
You can turn tracking off but if you set the receiver to begin recording a trip, the track will be turned on
until you stop the trip.
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Track’ and press ENTER.
3. Highlight the ‘Tracking ON’ field.
4. Press ENTER to select on (checked) or off (unchecked).
5. Press BACK.
Displaying the Track on the Map
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Track’ and press ENTER.
3. Highlight the ‘Display on Map’ field.
4. Press ENTER to select on (checked) or off (unchecked).
5. Press BACK.
Setting the Track Logging Intervals
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Track’ and press ENTER.
3. Highlight the ‘Interval Between Points’ field and press ENTER.
4. Use the joystick to select time interval and press ENTER.
5. Press BACK.
Clearing Tracks Displayed on Map
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Track’ and press ENTER.
3. Highlight the ‘Clear All Tracks’ field.
4. Select Yes or No from the pop-up window.
5. Press BACK.
Proximity Alarm Options
You can choose to have an audible alarm to play when you are near your destination or when you lose
the GPS fix.
Setting the Proximity Distance for Alarm
1. Access the Tools menu and select ‘Settings’.
2. Highlight ‘Proximity Alarm’ and press ENTER.
3. Highlight the ‘On Arrival’ field and press ENTER.
4. Select the distance to sound the alarm or OFF.
5. Press BACK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
