31
Installing Geocaches with ‘Send to GPS’ (Detail Page)
1. Go to www.geocaching.com on your browser.
2. Use the search tools on geocaching.com to view a list of geocaches.
3. In the row indicated above with the red box, click on the geocache name to open the geocache
page.
4. Select the “Send to GPS” button.
5. Select the Magellan tab in the “Send to GPS” window.
6. The Send to GPS function first detects if you have the
Magellan Communicator installed. If not, the message
“Magellan Communicator not found...” appears. Select the
“click here” link to install the Magellan Communicator. The
Magellan Communicator only needs to be installed the first
time a connection is made between an internet browser and
the receiver.
7. Click on the “Download” button.
8. The geocache selected is uploaded to your receiver and can
be accessed from the Geocaches function of the Main Menu
on your receiver.
The Magellan Communicator
The Magellan Communicator is used to communicate between geocaching.com and your Magellan GPS
receiver. You can install the plug-in by using the steps above or by going to the Magellan web site as
explained here.
The ‘GPX eXchange File
button is greyed out for
non-premium users.
To Next Page
Loading...
