Magellan LeadCare II - The LeadCare II Message Display; Required Materials; Precautions

LeadCare
®
II User's Guide 4-2
The LeadCare II Message Display
The message display screen is designed to guide you through the testing
process. Remember to read the display messages.
PLEASE RECALIBRATE
Figure 4-1 Message Display
Required Materials
CAUTION: Make sure the analyzer, test kit, and samples are
at room temperature before testing.
• Protective Powder-free Gloves
• Alcohol Wipes, Gauze Pads, Lead Free Wipes (optional)
• Lancets
• Absorbent Liner and Biohazard Waste Container
• LeadCare II Analyzer and Power Cord or Batteries
• LeadCare II Quick Reference Guide
• LeadCare II User’s Guide
• LeadCare Test Kit Items:
o Heparinized Capillary Tubes/Plungers
o Treatment Reagent Tubes
o Blood Lead Sensors
o Calibration Button
o LeadCare II Lead Controls, Level 1 & 2
o Droppers
Precautions
Observe the precautions listed throughout this section. Failure to follow these
precautions could result in inaccurate test results.
Important precautions for testing are also listed in Chapter 1, Important
Precautions.