Magellan MG6250 User Manual

MG6250 • Section Programming Guide
Version 1.6
Remote Control Programming | 11
Remote Control Programming
Remote Control Serial Number
Assigning a Remote Control
1. Enter the remote’s respective section (see Programming Remote Controls on page 12).
2. Press any button on the designated remote twice, or manually enter the serial number.
Deleting a Remote Control
1. Enter the remote’s respective section (see Programming Remote Controls on page 12).
2. Enter 000000.
Remote Control Button Assignment
Refer to table 8 for details on button options for the MG6250 remote controls. The MG6250 Console supports the following remote controls: REM1, REM2, RAC1,
RAC2, REM3, REM15, and REM101.
Section Remote Remote Control Serial Number
[0401] RC1 / / / / /
[0402] RC2 / / / / /
[0403] RC3 / / / / /
[0404] RC4 / / / / /
[0405] RC5 / / / / /
[0406] RC6 / / / / /
[0407] RC7 / / / / /
[0408] RC8 / / / / /
[0409] RC9 / / / / /
[0410] RC10 / / / / /
[0411] RC11 / / / / /
[0412] RC12 / / / / /
[0413] RC13 / / / / /
[0414] RC14 / / / / /
[0415] RC15 / / / / /
[0416] RC16 / / / / /
Table 8: Button options for MG6250 remote controls (see Decimal and Hexadecimal Programming Table on page 3)
Option Description Option Description
0 Empty/button disabled 8 PGM activation 4 (event group 10)*
1 Disarm 9 PGM activation 5 (event group 11)*
2 Stay arm A PGM activation 6 (event group 12)*
3 Sleep arm B PGM activation 7 (event group 13)*
4Full arm CPanic 1
5 Activate window mode (StayD) D Panic 2
6 PGM activation 1 (event group 08)* E Panic 3
7 PGM activation 2 (event group 09)* F Paramedic alarm
* For descriptions on the event groups, refer to section Description of MG6250 Events on page 35.

Magellan MG6250 Specifications

General

Brand	Magellan
Model	MG6250
Category	Security System
Language	English