Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx Revision No.4
© Magic Mobility Page 40 of 65
Use the same process to learn multi-digit channels. You can choose to store specific channels rather
than digits in your ‘Channel Selection’ menu.
Enabling and Disabling IR Codes
IR codes can be enabled or disabled in the IR Set Up menu.
To disable an IR Code, select the – key on the front panel of the CJSM2-BT. Disabled IR
codes appear with an X against the highlighted Command.
To enable an IR Code, select the + key on the front panel of the CJSM2-BT. An enabled code
appears with a tick against the highlighted command.
Figure 19 – Disabled and Enabled IR Codes
Deleting IR Codes
To delete an IR Code for a command, highlight the specific command in the appliance menu and
press the right button. Then select the Delete Code option (Figure 23)
To delete all IR Codes for an appliance, select Delete All Codes and turn the CJSM2-BT off and on to
ensure correct operation
Figure 20 – Deleting individual IR Codes (left) and sets of IR Codes for an Appliance (right)
To Next Page
Loading...
Need help?
General
