47
You have the choice of two methods of connection:
Manual: Select “Manual” if you wish to enter the new camera’s IP address and port directly.
Then enter this data further down the page under “Manual configuration”.
Dynamic: Where a fixed Internet address has been set up for the new camera (see Section
“6.8. DDNS Settings”), this may also be used to access it. Please specify the requisite
domain name further down the page under “Dynamic configuration”.
Where the “Manual” connection mode is chosen, the manual con guration data for the new
camera also need to be speci ed. Refer to Section “6.5. Network settings” for how to esta-
blish the camera’s IP address and port.
IP adress: Specify the camera’s IP address.
Port: Also specify a port for the camera.
For Dynamic Con guration a domain name also needs to be speci ed:
Domain name: Enter here the user name specified via the screen http://supracam.net/.
For example, if the camera can be accessed via http://ipcamera.supracam.net/, enter
“ipcamera” here.
Use
to save these entries and return to the camera list.
To Next Page
Loading...
