Magner 150 - Operation Modes I; Counterfeit Detection Mode (CF)

User’s Manual MAGNER150
- 15 -
4. Operation Mode I
4-1. Batch Mode
4-2. CF Mode
Display shows as below.
CF
If you want to detect the
counterfeit, press CF key
before counting.
Mix RJP CF
--------------------
0
0
€
0
--------------------
B100 ---
CF function is performed with other mode, except Count Mode and Serial
Number Print Mode, at the same time.
Display shows as below.
BATCH
If you want to activate Batch
function, press BATCH key. But
Display has no change.
After activating Batch function, if
you press BATCH key again, you
can select Batch Number. Batch
Number is changed continuously
when you press BATCH key.
If you press and hold down
BATCH key, Batch function is
inactive and Batch Number
becomes zero.
Mix RJP CF
--------------------
0
0
€
0
--------------------
B100 ---
Mix RJP CF
--------------------
0
0
€
0
--------------------
B 0
---